Kraken

What is the minimum start weight on the Kraken?

The minimum start weight is 5 pounds.

Is the Weight Stack Pin compatible with the Weight Stack Kraken?

Yes, the Weight Stack Pin is compatible with the Weight Stack Kraken — but only the option without a Shroud. The shroud covers the rear of the weight stack system, preventing the Weight Stack Pin's hitch pin to be locked in place.

Can you convert a Plate-Loaded Kraken into a Weight Stack Kraken?

No, it is not possible to convert a Plate-Loaded Kraken into a Weight Stack at this time.

Does the Kraken include the 2-1 Cable Adapter?

Yes, each Kraken includes a 2-to-1 Cable Adapter.

Does the Kraken include the handles?

Yes, each Kraken includes a pair of Aluminum Handles with Bearings.

Is the Kraken compatible with the Smith Machine?

Yes, the Kraken is compatible with the Smith Machine Rack Attachment, but 30" or 43" crossmembers are required (for example, The Kolossos).

Is the Kraken compatible with the Lat Pulldown Attachment?

Yes, the Kraken is compatible with the 84-inch & 90-inch Hydra/Manticore Lat Pulldown Low Row Rack Attachment.

With the Kraken installed, does your rack need to be bolted down?

Yes, your rack must be bolted down or have Front Foot Stabilizers when the Kraken is installed.

What crossmember depths are compatible with the Kraken?

The Kraken is compatible with the following crossmember depths: 24-inch, 30-inch & 43-inch.

How to prevent cable twisting on the Kraken?

Avoid excessive single-sided cable use as may cause cable twisting, and it accelerates wear on the cable & pulleys.