Do I need to bolt the All-In-One to the floor?
It depends. The Weight Stack version does not need to be bolted to the floor. However, the Plate-Loaded version does need to be bolted to the floor due to its lighter weight.
All articles
All-In-One Trainer
What rack attachments are compatible with the All-In-One Trainer?
The All-in-One Trainer is compatible with 2.3" x 2.3" (5/8" Holes) rack attachments.
Can assembly be done with a single person?
Yes, assembly can absolutely be done with one person! We do recommend having another person to help out to make assembly easier though. We highly recommend watching our All-In-One assembly video:.
What tools are required for assembly of the All-In-One and are they included?
The assembly tools required are: Knife/Box Cutter, 4mm Allen Key, 2x19mm wrench, 2x17mm wrench or socket wrench, a fixed wrench and either a flathead or Phillips screwdriver. Tools are not included.
Do you have an All-In-One assembly video?
Yes! We have a great assembly video that will walk you step-by-step through the process:.
Why are the cables on my All-In-One twisting?
The cable is meant to be used in a linear motion, any twisting or rotating of the cables will twist the cables. Since the cable ends are fixed, repeatedly using only one side will gradually spin/twist the cables.
[Plate-Loaded] - Are weight plates included with the Plate-Loaded version?
No, the Plate Loaded All-In-One Trainer does not include weight plates. However, it is designed to be compatible with 2" Olympic-sized weight plates, which are widely available and commonly used in most home and commercial gyms.
What is the distance between the chrome uprights?
The distance is just over 44" inches.
What is the width of the top of the All-in-One Trainer?
The width across the top is approximately 51 inches.
Are replacement cables available for the All-In-One?
Yes, replacement cables are available on our website here: 🔗 Selectorized All-In-One Trainer Cables (Canada) 🔗 Selectorized All-In-One Trainer Cables (USA)
What handles/attachments are included with the All-In-One?
The All-in-One Trainer includes a great variety of attachments to get you started: a pair of nylon handles, a lat pulldown bar, and a short straight bar. This mix gives you the versatility to perform a wide range of exercises right out of the box.
[Plate-Loaded] - Can the Plate-Loaded All-in-One Trainer be converted to a Weight Stack?
Yes, you absolutely can! Our Plate Loaded All-In-One Trainer can be converted to a Weight Stack version by purchasing the compatible weight stack upgrade kit. It’s a great option if you’re looking for quicker, more convenient resistance changes...
[Plate-Loaded] - How many plates can fit on the All-In-One Trainer?
On each weight horn, you can fit either three 45lb bumper plates, or four 45lb iron weight plates (please don't exceed the 300lb cable capacity).